模具行業信息
機械行業標準編寫人員資格培訓暨5項模具行業標準制定工作啟動會
在南寧召開 …………………………………………………(Ⅰ-Ⅳ)
綜述
金屬塑性成形中摩擦模型的研究進展………孟麗芬, 胡成亮, 趙 震(1)
汽車行業沖壓廠的裝箱料架規劃與配置……………曹江懷, 唐國鑫(8)
模具 CAD/CAM
基于機器學習的RFID定位技術在模具行業的應用研究
…………………………汪凱雷, 張靖暹, 李 翔, 王華昌, 李建軍(11)
模具零件的最小包圍盒生成算法……孔垂品, 牛 強, 柳 偉, 周雄輝(15)
沖模技術
車身B柱零件整形翻邊復合模設計
…………………………………劉龍芬, 陳 科, 岑 凱, 閆慶禹(19)
支架多工位級進模設計……………嚴昌賢, 劉立如, 李文勝, 王可勝(23)
精密橢圓彎曲模設計…………………………王 巍, 吳 磊, 高海寶(26)
左后內輪罩安裝支架級進模設計…………………………………蒙以嫦(30)
支撐板多工位級進模設計……………………李昌雪, 李 捷, 陳劍玲(34)
型腔模技術
透明制品注射模的研究與應用……………黃 俊, 侯朝暉, 王 濤(38)
基于CAE技術的微注射模設計……李欣棚, 杜海南, 米大山, 張 杰(41)
傳真機面板注射模設計………………………………王明哲, 喬 女(46)
彎鉤澆口的頂出機構設計…………張彥書, 趙建亮, 王丁強, 王春雷(48)
基座注射模設計…………………………………………………朱偉珍(52)
擴口類管件注射模抽芯機構設計………………………………蘇 偉(56)
調節模溫改善圓柱縮孔問題……………………………………黃克榮(58)
減振器外體模鍛成形工藝與設計改進……李志廣, 王曉慶, 代文忠(61)
彎銷和特殊斜銷抽芯壓鑄模設計………………………………周健波(64)
模具人才培訓
材料成型及控制工程專業引入計算機模擬方法教學的研究
…………………………李云濤, 楊立軍, 金飛翔, 畢大森, 褚 亮(67)
材料成型及控制工程專業CAE課程的探索與研究………………………
…………………………………余 玲, 彭必友, 劉云強, 馮小平(70)
《模具工業》在貫徹執行模具國家標準中應起表率作用
……………………………………………………李和平, 朱 萌(73)
期刊版權聲明………………………………………………………………(66)
期刊基本參數：CN 45-1158/TG*1975*m*A4*80*zh*P*
￥10.00*15 000*21*2014-04
Information of die & mould industry…………………………………(Ⅰ-Ⅳ)
Overview
Research progress of friction model in metal plastic forming
MENG Li-fen, HU Cheng-liang, ZHAO Zhen…………………………(1)
Planning and configuration of material-binpacking frames in stamping………
factories in automobile industry…… CAO Jiang-huai, TANG Guo-xin(8)
Die and mould CAD/CAM
Machine learning-based application research of RFID positioning
technology in die & mould industry…………………………WANG Kai-lei,
ZHANG Jing-xian, LI Xiang, WANG Hua-chang, LI Jian-jun(11)
Generation algorithm of minimum bounding box for die & mould components
……………KONG Chui-pin, NIU Qiang, LIU Wei, ZHOU Xiong-hui(15)
Technology of stamping and punching dies
Design of sizing and flanging composite die technology for vehicle body
B-type column……LIU Long-fen, CHEN Ke, CEN Kai, YAN Qing-yu(19)
Design of multi-position progressive die for stent
……YAN Chang-xian, LIU Li-ru, LI Wen-sheng, WANG Ke-sheng(23)
Design of precision bending die for elliptic sheet
…………………………………WANG Wei, WU Lei, GAO Hai-bao(26)
Design of progressive die for the installation stent of left rear internal
wheel casing………………………………………MENG Yi-Chang(30)
Design of multi-position progressive die for support plate
………………………………LI Chang-xue, LI Jie, CHEN Jian-ling(34)
Technology of cavity moulds
Research and application of injection mould for transparent product
……………………………HUANG Jun, HOU Zhao-hui, WANG Tao(38)
CAE technology-based design of micro-injection mould
…………………LI Xin-peng, DU Hai-nan, MI Da-shan, ZHANG Jie(41)
Design of injection mould for fax machine panel
…………………………………………WANG Ming-zhe, QIAO Nǔ(46)
Plan of ejection mechanism for banana gate
…………ZHANG Yan-shu, ZHAO Jian-liang, WANG Ding-qiang
WANG Chun-lei(48)
Design of injection mould for base………………………ZHU Wei-zhen(52)
Design of core-pulling mechanism of injection mould for flaring pipe
fitting…………………………………………………………SU Wei(56)
Regulation of mould temperature and improvement of void in injection
moulding of cylindrical……………………………HUANG Ke-rong(58)
Die forging process and improvement of design for absorber body
…………………LI Zhi-guang, WANG Xiao-qing, DAI Wen-zhong(61)
Design of die-casting die with curved pin and special angle pin for
core-pulling……………………………………………ZHOU Jian-bo(64)
Talent training
Research on the teaching of computer simulation method in material
forming and control engineering specialty……LI Yun-tao, YANG Li-jun,
JIN Fei-xiang, BI Da-sen, CHU Liang(67)
Exploration and research of CAE curriculum for material forming and
control engineering specialty………………………YU Ling, PENG Bi-you,
LIU Yun-qiang, FENG Xiao-ping(70)
“Die & Mould Industry” journal should lead the way in implementing
national standards for dies and moulds………LI He-ping, ZHU Meng(73)
Patents for die and mould……………………………………………………(66)
Sponsor: Guilin Electrical Equipment Scientific Research Institute CO.,Ltd.
Editor/ Publisher: Editorial Department of "Die ＆ Mould Industry"
Add: No.8 Dongcheng Road, Guilin 541004, PRC
Tel: +86-773-5888145 5888405
Fax: +86-773-5888375
E-mail: mjgy2008@qq.com
Http: //www.moulds.com.cn
